What are the safety operating procedures for underground loaders

2025-11-04 16:59:43

       The safety operating procedures for Underground loaders are crucial to ensure the safety of operators and the normal operation of equipment. Here are some key safety operation steps and precautions:
       1. Operator qualifications
       Training and Authorization: Only trained and authorized operators are allowed to operate underground loaders.
       Personal protective equipment (PPE): Operators must wear appropriate safety gear, including helmets, safety goggles, gloves, pants, and safety shoes.
       2. Pre operation inspection
       Equipment inspection: Before starting the equipment, check for any loose or worn parts and promptly repair or replace them.
       Fluid inspection: Check the liquid levels of all fluids (such as coolant, hydraulic oil) to ensure they are at normal levels.
       Tire inspection: Check the tires for cuts, bulges, abnormal wear, and correct inflation pressure.
       Emergency equipment: Ensure that fire extinguishers and first aid kits are installed in the cab.
       3. Safety features
       Roll over protection system (ROPS): Ensure that the loader is equipped with a roll over protection system to protect the safety of operators when the vehicle rolls over.
       Enhanced lighting system: In underground environments, a good lighting system helps improve visibility and reduce collision risks.
       Fire suppression system: equipped with a fire suppression system to respond to possible fire accidents.
       Emergency alarm system: Install an emergency alarm system to promptly alert operators in case of equipment failure.

       4. Safety precautions during operation
       Stay alert: Operators should always remain vigilant, pay attention to the surrounding environment, and avoid colliding with other equipment or structures.
       Avoid overloading: Ensure that the load of the loader does not exceed its rated capacity to prevent equipment damage or accidents.
       Use auxiliary tools: Use auxiliary tools (such as reflective vests, warning lights) when necessary to improve visibility and safety.
       Comply with speed limits: In underground environments, follow the speed limits specified by the manufacturer to ensure the stability and safety of the equipment.
       5. Maintenance and repair
       Maintenance plan: Follow the manufacturer's maintenance plan and conduct regular equipment maintenance to ensure its normal operation.
       Lockout/Tagout Procedure: Lockout/Tagout procedures must be performed during equipment maintenance or repair to prevent accidental activation.
       Cleaning and organization: Ensure that the cab and work area are clean, free of debris and tools, to reduce the risk of slipping and falling.
       6. Emergency situation handling
       Emergency stop switch: Ensure that the emergency stop switch is easily accessible and can be quickly operated in emergency situations.
       Evacuation procedure: In the event of a fire, gas leak, or other emergency situation, the operator should be familiar with and able to quickly execute the evacuation procedure.
       By following these safety operating procedures, the risks during the operation of underground loaders can be significantly reduced, the safety of operators can be protected, and the reliability and efficiency of equipment can be improved.